LUA-U22C567B004
Password : pemudadesa
(This file is tested by Faizan GSM)
---------------------------------------
---------------------------------------------------------------------------------------------
(THIS UPDATE CONTAIN THE WHOLE FIRMWARE WITH THAT YOU CAN REVIVE YOUR PHONE EVEN VIBRATE STATE, OR NORMALLY UPDATE INCLUDE SIGNED FIRMWARE + SP SECURE FLASH TOOL + SD CARD UPDATE)
This file can be used for the following version
LUA-U22C328B014
LUA-U22C328B016
This file can be used for the following version
LUA-U22C328B004
LUA-U22C328B005LUA-U22C328B014
LUA-U22C328B016
How to flash stock firmware rom (flash file)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you have to download SP Tool if you already have skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder and un-tick preloader if the boot loader is locked.
Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.
Step 6: Press both volume up and down to connect your smartphone to the computer using the usb Driver.
Step 7: Green Ring will appear at the end of successful Flash.
Important notes:
Although this firmware is tested yet take a backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile
How to flash stock firmware rom (flash file)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you have to download SP Tool if you already have skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder and un-tick preloader if the boot loader is locked.
Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.
Step 6: Press both volume up and down to connect your smartphone to the computer using the usb Driver.
Step 7: Green Ring will appear at the end of successful Flash.
Important notes:
thanks good file
ReplyDeleteglad to hear your positive comments
Deletesaya sudah ikuti langkah demi langkahnya dan sudah sampai selesai dalam flasing lua u22 tapi setelah saya cabut kabel usb dan copot baterai kemudian saya pasang lagi dan nyalakan hp kenapa masih bootlop juga mas?? apakah ada kesalahan?? lua u22c328b005
ReplyDeleteMight be your build number is not lua u22c328b005 you can verify your mobile build and flash with correct firmware, That might be helpfull for you. Translation to indon...
DeleteMungkin nomor build Anda bukan lua u22c328b005 Anda dapat memverifikasi build seluler Anda dan flash dengan firmware yang benar, Itu mungkin bisa membantu Anda.
c32 and c56 both have different version
DeletePost a Comment