INSTRUCTION : TO AVOID DEAD / VIBRATE
After wasting a lot of time on net in search about this brand few things keep in mind
- if your hand set stuck on logo use wipe data and cache
- if it fails in wiping data cache 90% its hardware issue take emmc test on cm2
- If you found the phone in vibrate condition then only then use R831K_11_A.13_150330.
- or if in the phone you are successful in wipe data cache and ota update is not working pay full attention on logo if phone shows logo but not in processing mode then you can flash by sp tool.
- normally people flash that phone as normal mtk phone NO select manual boot image as IK.bin file in that scatter file it is already selected ik bin file for boot, you don't need to select it.
- Hope that will help you lot !! wish you a good luck.
FOR BRICK, VIBRATE AND DEAD HANDSET
R831K_11.A.18_OTA_INT_018_all_160324.zip (DOWNLOAD FILE)
R831K_11_A.13_150330 (Scatter file for vibrate and dead handset) DOWNLOAD FILE
TO FLASH THIS FIRMWARE WITH SP TOOL YOU CAN FOLLOW THIS GUIDE
Post a Comment