Work on Secure Boot phone / Qmobile J2 2017 Secure boot read flash done!!

Work on Secure Boot phone 





Here is video method 


Before starting to find our the Secure Download agent please read this 
--------------------------------------------------------------------
Normally connect your phone with cm2 without replacing any DA if your phone gives this information 
BB_CPU_NME : [MediaTek] MTxxx
Then your cpu is not supported by CM2, Don't waste your time try other tool or stop complaining about not to connect. 
Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 0633
BB_CPU_NME : [MediaTek] MTxxx
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage

[DA_ERROR] : Correct BOOT CONFIGURATION not found for target!
Try Re-Install CM2MTK module!
Boot Error!

--------------------------------------------------------------------


I
iF YOU ARE ON THIS POST YOU ALREADY KNOW WHAT TO DO THE ONLY THING YOU ARE LOOKING FOR IS SECURE DOWNLOAD AGENT.

Here are some tips to find you supported Download Agent.

These Download Agent works according to your cpu such as (MT6580, 6755, 6755M) or whatsoever you CPU is, and some time according to your brand. If you didn't find you phone's DA try with the same cpu DA hopefully will work for you, you can also find and match your phone's cpu information with other phones cpu which are enlisted in this download folder.

IF YOU WANT TO DOWNLOAD THESE SECURE DOWNLOAD AGENT VISIT THIS POST
If you still have any question please comments below. 

41 comments:

  1. this boot file work in any phone like oppo f3

    ReplyDelete
    Replies
    1. No brother every model have it's unique Download agent which is mostly available with its factory file or in Falashing tool. such as you download full package of huawei secure boot phone firmware with usb update, you can find it in tool's folder

      Delete
  2. Nice Work Dear......
    smnew phones dead by CM2 EVEN WHEN WE Write readed file fro same phone via CM2 IT fails to alive the phone ,why ? what is correct method for new phones tou read any new MTK File as DCC/ Factory Firmware ...

    ReplyDelete
  3. THANK YOU BROTHER LOVE YOU TOOO !!!

    ReplyDelete
  4. Hi sir,
    Huawei LUA-U22. I have downloaded and done as per procedure but not work for me and for Huawei LUA-U22. Need logs i can put here. Replace DA is ok because have gone for Qmobile good. Please can u check it again and give me helping hand.
    Thanks
    Br, Raja

    ReplyDelete
    Replies
    1. lua-u22 need no Secure download agent, you can work on that phone without any DA, Just press volum+ and Volum - together and attach your phone with cm2 or any other mtk tool, I had tested that method. thanks

      Delete
  5. Replies
    1. sir jee meray pas q mobile j2 hy frp lock ni khul raha g is ka koy hal to bain g plz

      Delete
  6. THANK YOU BOSS FOR THE BOOT FILE LINK

    ReplyDelete
  7. brooo i need secure boot file

    ReplyDelete
  8. i need i6 metal 2017 secure boot file

    ReplyDelete
  9. reload the download link please not works

    ReplyDelete
  10. nice work bro
    thanks for very important info share with all
    Love you

    ReplyDelete
  11. moto xt1750 mtk 6580 only boot bin file pleseeee

    ReplyDelete
  12. how to hard reset oppo fls with cm2 box ... help me bro

    ReplyDelete
  13. thanks for your wonderful job sir
    sir i need lava iris80 boot.bin file if you have...

    ReplyDelete
  14. how to flash huawei lua-u22 brom eror s brom download da fall (2004)
    h/w fail to download da to baseband chip s intemal sram hint
    fix problem solution

    ReplyDelete
  15. [DA_ERROR] : Correct BOOT CONFIGURATION not found for target!
    Try Re-Install CM2MTK module!
    Boot Error!

    plZ....help me....

    ReplyDelete
    Replies
    1. Brother Sojeb This phone is also secure boot, Unfortunately you can only flash it with signed firmware you can find it here (https://drive.google.com/uc?export=download&confirm=jWUq&id=0B5VWb6ZrlbZOLWtPaHZkOG9Mb00) this package contain its secure boot SP tool. Hope will help you

      Delete
  16. Bro u are great personnnn thxxxxxxxxxxx

    ReplyDelete
    Replies
    1. thanks for appriciation kindly participate in this sadqa jaria with https://4frp.blogspot.com/p/donation.html
      share you firmware so that other people also get the benefit !!!
      br.
      Habib

      Delete
  17. gooooooooooooooood one thankyou

    ReplyDelete
  18. huawei lua-u22 secure boot not accepted problem

    ReplyDelete
    Replies
    1. you don't need any secure boot for that phone just press volume up or down (try one by one) and connect your phone with cm2 for frp and wipe only

      Delete