LG E445 FIRMWARE / SCATTER FILE / FLASH FILE




FIRMWARE OPERATION LOG 

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A3B168512B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : FD88F3FE69557A0025E6C130F657D976
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 


Read Ok , collect info

Brand     : lge
ProdName  : vee4ds_open_esa
ProdModel : LG-E445
Device    : vee4ds
AndroidVer: 4.1.2
MTKxCPU   : MT6575
MTKxPRJ   : ALPS.JB.TC1.SP.V13
Saved to : C:\Users\BBBB\Desktop\LG E445 MTK6575\MT6575__LGE__LG-E445__vee4ds_open_esa__vee4ds__ALPS.JB.TC1.SP.V13__Android_4.1.2.ispff

Done!

Elapsed: 00:20:42



MT6575__LGE__LG-E445__vee4ds_open_esa__vee4ds__ALPS.JB.TC1.SP.V13__Android_4.1.2



HOW TO FLASH SCATTER FILE WITH SP TOOL 

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you have to download SP Tool if you already have skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder.
Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.
Step 6: Connect your smartphone to the computer using the usb Driver.
Step 7: Green Ring will appear at the end of successful Flash.

DISCLAIMER: 


Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.


1 comment: