MT6572 Samsung GT-S7582 GT-S7582 4.2.2 ALPS.JB3.MP.V1.38



OPERATIONAL LOG 


Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0×0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0×00000000
BromVer   : 0x00FF
BLVersion : 0×0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0×88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D30344728136969095019
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0×45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D30344728136969095019
[eMMC] : FLASH_BRT : 0×00200000 , 0×00200000 , 0×00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xA860A74661E107D37FBAACACD10AD29B
INT RAM    : 0×00020000
EXT RAM    : 0×20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now … 
Brand     : Samsung
ProdName  : GT-S7582
ProdModel : GT-S7582
Device    : GT-S7582
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.38
[Read Ok] : preloader_keytak72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / keytak72_wet_lca / EMMC
Android Info saved
HWConfig Info saved
FW Size : 476 MiB
Scatter saved to : Desktop\Habib\Read\MT6572__Samsung__GT-S7582__GT-S7582__4.2.2__ALPS.JB3.MP.V1.38
All done!


Done!
Elapsed: 00:04:24
Reconnect Power/Cable!


FIRMWARE INFORMATION 


Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Samsung
Device Model   : GT-S7582
Device CPU     : MT6572
Device IntName : GT-S7582
Device Version : 4.2.2
Device Compile : 10/8/2015 7:02:21 AM
Device Project : ALPS.JB3.MP.V1.38

Device ExtInfo : GT-S7582



HOW TO FLASH SCATTER FILE WITH SP TOOL 

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you have to download SP Tool if you already have skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder.
Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.
Step 6: Connect your smartphone to the computer using the usb Driver.
Step 7: Green Ring will appear at the end of successful Flash.

DISCLAIMER: 
Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.

1 comment: