QMOBILE Z10 MT6735 DEAD RECOVERY FLSH FILE DCC FIRMWARE

PRECAUTION ABOUT THE PHONE 

QMOBILE Z10 HAD 3 DIFFERENT VARIANT MOST OF THE PEOPLE JUST FOLLOW THE PROJECT NAME AND FLASH THEIR PHONE WITH WRONG FIRMWARE AND AT THE END OF FLASHING THEIR HAND SET JUST VIBRATE ONLY.
IF THE FOLLOW THEY MEMORY THEY CAN FLASH THEIR SET WITHOUT ANY TENSION 
IF YOUR HANDSET DEAD AFTER FLASH, READ INFORMATION REGARDING THAT DEAD HANDSET AND FLASH IT WITH THE CORRECT VERSION. 

MT6735__QMobile__QMobile_Z10__QMobile__5.1__ALPS.L1.MP3.V2.21_6753.65U.G_P53

Device Memory Details ( installed ) : 
RAM : [3 GiB]
ROM : eMMC 32 GiB
Manufacturer : [SAMSUNG]
Name : BMB12


DOWNLOAD THIS FILE 
------------------------------------------------

MT6735__QMobile__QMobile_Z10__QMobile__5.1__ALPS.L1.MP3.V2.21_6753.65U.G_P53

Device Memory Details ( installed ) : 
RAM : [3 GiB]
ROM : eMMC 16 GiB
Manufacturer : [HYNIX]
Name : e2GA

DOWNLOAD FILE 
------------------------------------------------
MT6735__QMobile__QMobile_Z10__QMobile__5.1__ALPS.L1.MP3.V2.21_6753.65U.G_P35

DOWNLOAD FILE 
------------------------------------------------

HOW TO FLASH SCATTER FILE WITH SP TOOL 

Step 1: Download and extract the firmware on your computer.

Step 2: After extracting you have to download SP Tool if you already have skip this step.

Step 3: Install the USB Driver (Skip if drivers are already installed).

Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder.

Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.

Step 6: Connect your smartphone to the computer using the usb Driver.

Step 7: Green Ring will appear at the end of successful Flash.

DISCLAIMER: 
Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.