Y625 WHOLE SERIES EDL FLASHTOOL FILES



IF HAND SET IS FULLY DEAD OR VIBRATE ONLY FOR CONNECTION WITH COMPUTER YOU HAVE TO SHORT THESE TWO POINTS TO CONNECT THIS PHONE FORCEFULLY.




Y625 WHOLE SERIES EDL FLASHTOOL FILE FOR DEAD / VIBRATE ONLY PHONES

If you have any one of these model and because of wrong flash file or any other accidental soft bricked, you can use these files to make your phone alive again. You can use these files to flash with Qfil or any other Qulqom Flasher

FILE INFORMATION 

Y625-U03 Y625-U03V100R001C63B108 (eDL FILE)
Y625-Y13 Y625-U13V100R001C480B103e (EDL FILE)
Y625-U21(Y625-U21V100R001C577B118 (EDL FILE)
Y625-U32 Y625-U32V100R001C567B105 (FLASH ABLE FILE)
Y625-U43 Y625-U43V100R001C464B106 (EDL FILE)
Y625-U51 Y625-U51V100R001C577B111
DOWNLOAD FILES

  1. Always use original / official firmware download from huawei website.
  2. These files are flash able by tool
  3. Only use these file if your phone is in dead condition or in vibrate or dload or sd card method is not working on your mobile.
  4. Always backup you mobile before taking serious action.
  5. Although these files are tested and then upload but use these file at your own risks
  6. You can use any factory flasher for Qualqom CPU like cm2, Avanger, miricle or qfil.
  7. if you find this post usefull kindly comments below will be more appreciable. 

3 Comments

  1. How to "SHORT THESE TWO POINTS TO CONNECT THIS PHONE FORCEFULLY." ?

    ReplyDelete
  2. Use tweezers short these point and insert usb cable within 2..3 second your phone will connect with pc, when connect successfully remove tweezers from the point.
    Or use Solder to connect these two point and connect with computer do your job and then remove the solder ... if still don't get the point google it you may find several ways to short these points..

    ReplyDelete
  3. Tengo mucho tiempo buscando como descargar el firmware de Y625-U21. Es decir, Y625-U21V100R001C577B118, y no la he podido descargar. Agradezco su apoyo para poder descargar el dicho firmware

    ReplyDelete

Post a Comment

Previous Post Next Post