G6-U10 V100R001C900B117CUSTC433D001




ABOUT THIS PHONE 

Huawei is one of the leading brand. Y5 is one of the best model of huawei which have so many excellent feature will give user full comfortably to operate it with ease. This mobile have mtk processor which some time need to re-flash so the performance of the device remain normal. This file is for that purpose to make your phone working again. And if accidentally you have flash you phone with wrong file and your mobile is in dead condition then no worries this firmware will helps you to resurrect your phone. 



FIRMWARE FILE NAME 

G6-U10 V100R001C900B117CUSTC433D001_
Firmware_Iraq_Qatar_Bahrain_Kuwait_Pakistan_United Arab Emirates_Iran, Islamic Republic of_Oman_4.3_2.0 Lite_05012HJK


DOWNLOAD YOUR FIRMWARE  DIRECT OFFICIAL LINK 

------------------------------------------------------------------------------------------------
HOW TO FLASH HUAWEI PHONE WITH SD / OTA UPDATE 
------------------------------------------------------------------------------------------------

INSTALLATION METHOD # 1
  1. Connect your phone to a personal computer by using short USB cable. and if your phone is not working properly then you can use SD card reader to copy these required file to the root directory of your sd card.
  2. Format your SD card with FAT32 and Make a new folder with the name of “dload” in its root directory.
  3. Extract the ZIP file which you have already download from the link above and copy all of its contents (“UPDATE.APP”) to the “dload” folder which we previously created in SD card. 
  4. Disconnect your phone from PC or disconnect your card reader from the personal computer.
  5. Reboot your mobile into recovery mode by powering off your phone and then holding Volume Down + Volume Up + Power Buttons simultaneously.
  6. Within a few seconds of keep pressing these button, the update process will be automatically execute/started. It will take about 3-4 minutes to get it complete, depends on your phone processor and ram speed.
  7. When you see the update successfully, you can use the Backup utility to restore all the data you backed up in the beginning.
ANOTHER METHOD TO FLASH THIS FILE 
  1. Copy the downloaded package to your SD card as I explain it in first method. 
  2. Go to your mobile Settings > Updates > System Updates
  3. Click on ‘Local Update’, carefully read all the warnings and then make a quick backup of your device (in case you haven’t done that already)
  4. Next step is tap ‘Confirm’ to proceed with the update installation. It shouldn’t take more than 10 minutes.
DISCLAIMER: 
Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.


Post a Comment

Previous Post Next Post