ROM DESCRIPTION
BRAND NAME : VODA FONE
MODEL: VF695
PROCESSOR : MTK
ANDROID VERSION: 4.4.2
BUILD : ALPS.KK1.MP6.V1
Operational log
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 20 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344D121DFE1A2A7267
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , M49J1
[eMMC] : FLASH_CID : FE014E50314A39344D121DFE1A2A7267
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC 4 GiB]
DEV RID : 0xBB23AFA9983FDBED9882FE159DAB0865
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : Vodafone
ProdName : VF695
ProdModel : VF695
Device : VF695
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP6.V1
[Read Ok] : preloader_pixi34_vf.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / pixi34_vf / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1122 MiB
Scatter saved to : C:\Habib\Desktop\READ\MT6572__Vodafone__VF695__VF695__4.4.2__ALPS.KK1.MP6.V1\
All done!
HOW TO FLASH SCATTER FILE WITH SP TOOL
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you have to download SP Tool if you already have skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder.
Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.
Step 6: Connect your smartphone to the computer using the usb Driver.
Step 7: Green Ring will appear at the end of successful Flash.
DISCLAIMER:
Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.
Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.
password
ReplyDeletePost a Comment