XIAOMI REDMI 4X FIRMWARE FOR QFIL FLASHER WITH 9008 PORT




LITTLE ABOUT PHONE 


Xiaomi is launching its new Redmi 4x according to the fashion trends. Design is quite outstanding and stunning where the outer compact that makes Xiaomi Redmi quite reliable in case of accident. Phone have 5 inch IPS display which is expert in displaying excellent colors. Xiaomi’s 4x have full HD pixels resolution, that will give you sharp picture results from the display angles. These phones have QUALCOMM MSM8940 snapdragon 45 chip set with 1.4 GHz octa core processor. Cortex A53 chip along with processor to reduce the battery consumption while enhancing the speed of processor. For graphing acceleration Adreno 505 chip set also helps Redmi 4x in graphic while multi-tasking and gaming experience. The mobile has arrived with different variant with 32 GB internal storage and 3 gigabyte of ram. Furthermore Android 6.0 is running inside this phone with MIUI 9 is also makes mobile more reliable.

This file has been tested on the phone which shows only Qualcomm 9008 Port. After writing this firmware phone is working 100%  smoothly. You can also flash this firmware if phone have unfortunately error, Monkey virus, Boot loop, or stuck on booting. 

BEFORE PROCEEDING TO DOWNLOAD KEEP IN MIND THIS IS A PAID FIRMWARE YOU MUST HAVE TO PAY $4 (RS=400/-) FOR PASSWORD 

Xiaomi_Redmi Note 4X_AL1512-mido-build-20180612173905_2018-05-01


FOR PASSWORD PAYMENT SHOULD MADE ON 
JAZZ CASH +923006562754 OR +923064443858 
AND CONTACT ON SAME NUMBERS ON WHATSAPP/CALL/MESSAGE

Don't want to pay... No Problem you can exchange your firmware collection with us with the paid files provided by us. Read More 

LOGS OF FLASHING THIS FIRMWARE 

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM118)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system.img] -> [system]  ...Done
Writing [cache.img] -> [cache]  ...Done
Writing [lksecapp.mbn] -> [lksecapp] ...Done
Writing [lksecapp.mbn] -> [lksecappbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [cust.img] -> [cust]  ...Done
Writing [userdata.img] -> [userdata]  ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished."



No comments