SCL-U31C185B161 (5.1.1) CM2 READED FIRMWARE

HOW TO CONNECT THIS PHONE IN EDL MODE 



READ FLASH BY CM2 

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 01D80C8E
ID_BLOCK_L : 1BED877FDE44717C2B00F0DD1A61F1D9
ID_BLOCK_L : B3C24CDFD043EB789D583DEAF837212A
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Brand     : Huawei
ProdName  : msm8909
ProdModel : msm8909
Device    : msm8909
AndroidVer: 5.1.1
Manufact. : unknown
QLMxCPU   : MSM8909
DevInfo : MSM8909__unknown__Huawei__ANDR_v5.1.1__msm8909__msm8909__msm8909
Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sec.dat
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : oemdata.bin
[Read Ok] : misc.img
[Read Ok] : fs_gc.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : persist.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : rec2.img
[Read Ok] : cache.img
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2297 MiB
Done!
Elapsed: 00:04:15
Reconnect Power/Cable!

READ SECURITY ITEM

Operation : EDL Security Operation [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 01D80C8E
ID_BLOCK_L : 1BED877FDE44717C2B00F0DD1A61F1D9
ID_BLOCK_L : B3C24CDFD043EB789D583DEAF837212A
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8909_[009600E1]_01D80C8E_SEC\

MSM8909__unknown__Huawei__ANDR_v5.1.1__msm8909__msm8909__msm8909

DOWNLOAD FILE   PASSWORD (4phonefile.com) 

This file has been read by cm2 so it can only be flash by the same tool. If you don't have cm2 dongle please don't waste your time to download this file it will be useless for you. 

SCL-U31C900B130CUSTC636D001

MT6582__Huawei__HUAWEI_SCL-U31__hwSCL-U31__5.1.1__ALPS.KK1.MP1.V2.11.7z

DOWNLOAD FILE  (TESTED FILE)


Leave your positive and encouraging comments below. 

No comments