TECNO_SPARK_CM_MT6737T_180421_7.0 SIGNED FIRMWARE





FIRMWARE INFORMATION 

BRAND: TECNO 
MODEL : SPARK 
PROCESSOR : MT6737T
ANDROID VERSION : 7.0
FILE TYPE: SCATTER
FACTORY FILE : SIGNED

Tecno_Spark_CM_MT6737T_180421_7.0


HOW TO FLASH WITH SP TOOL

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you have to download SP Tool if you already have skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool and load the Scatter file from the firmware Folder.
Step 5: Click on Upgrade / Download Button in the Sp flash tool to begin the flashing process.
Step 6: Connect your smartphone to the computer using the usb Driver.
Step 7: Green Ring will appear at the end of successful Flash.

DISCLAIMER: 

Please keep in mind mind that despite the fact that, this method has been fully tested and verified, I shall not be held responsible if your device gets screwed up at any point. Apply this update at you own risk.

No comments