FILES NEED TO REPAIR OR UNLOCK
E8231s-All Version Final Unlok Solution (IF DEVICE IS WORKING JUST FLASH WITH THIS FIRMWARE AND FOLLOW THE FULL GUIDE FROM HERE
FcSerialDrv.rar
HUAWEI DRIVERS.rar
dc-unlocker2client_1.00.1366
0. E8231s-1: Short Boot Point And Connect To PC Usb Port
1. FcSerialDrv: Install Drivers
2. Start E8231s_Unlocker_By_Marhaba_Team And Press Enter
3. Enter PC UI Interface Port: And Press Enter And Press Any Key
4. After flash 3Parts ReConnect Device In Normal Mode And Press any Key
5. WEBUI installation Will Auto Start After Firmware Press start and Complete it
6. After Install Webui Press any key to exit unlocker
7. HuaweiCalc: Calc V201 Code Via Imie
9. Put Wrong Sim Card And Enter Unlock Code
iTs Done
AT^CARDLOCK="30116801"
dc-unlocker2client_1.00.1366
E8231_stick_usbloader (TO REVIVE DEAD BOOT)Balong_USB_Downloader_1.0.1.10 (ONLY USE IF YOUR DEVICE IS TOTALLY DEAD) DON'T USE IT ON WORKING DEVICE OR JUST FOR UNLOCK)
1. FcSerialDrv: Install Drivers
2. Start E8231s_Unlocker_By_Marhaba_Team And Press Enter
3. Enter PC UI Interface Port: And Press Enter And Press Any Key
4. After flash 3Parts ReConnect Device In Normal Mode And Press any Key
5. WEBUI installation Will Auto Start After Firmware Press start and Complete it
6. After Install Webui Press any key to exit unlocker
7. HuaweiCalc: Calc V201 Code Via Imie
9. Put Wrong Sim Card And Enter Unlock Code
iTs Done
AT^CARDLOCK="30116801"
PASSWORD PLEAS
ReplyDeletePASSWORD PLEAS
ReplyDeletePASSWORD PLEAS
ReplyDeletePassword: Gsm@MarhabaE8231s-1
ReplyDeleteno service problem
ReplyDeletePost a Comment